Physical Port
5-port 10/100/1000Base-T RJ-45 with 4-port
IEEE 802.3af / 802.3at PoE Injector
Power over Ethernet
Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet Plus End-Span PSEUp to 4 IEEE 802.3af / 802.3at devices poweredSupports PoE Power up to 30.8 watts for each PoE portProvides DC 52V power over RJ-45 Ethernet cable to PD with Ethernet portAuto-detects IEEE 802.3af/at equipment and protects devices from being damaged by incorrect installationRemote power feeding up to 100m
Layer 2 Features
Supports Auto-Negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex modePrevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame flow control (full-duplex)Automatic address learning and address aging
Industrial Case / Installation
IP30 aluminum metal case protectionDIN Rail and Wall Mount Design48V DC redundant power with polarity reverse protect function and removable terminal block for master and slave powerSupports EFT protection of 6000 VDC for power lineSupports 6000 VDC Ethernet ESD protection-40 to 75 degrees C operating temperature
Hardware SpecificationsCopper Ports5 x 10/100/1000Base-T RJ-45 TP
Auto-MDI/MDI-X, Auto-NegotiationConnectorRemovable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2AlarmProvides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24VLED3 x LED for System and Power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Green: Power Fault
2 x LED for Per Copper Port (Port-1~Port-4):
■ Green: 1000 LNK/ACT, Orange:100 LNK/ACT
■ Orange: PoE In-use
1 x LED for Port-5:
■ Green: 1000 LNK/ACT, Orange:100 LNK/ACT
4 x LED for PoE Power Usage (W):
■ Orange: 30, 60, 90 and 120WESD Protection6KV DCEFT Protection6KV DCEnclosureIP30 aluminum metal caseInstallation TypeDIN rail kit or wall mountDimensions (W x D x H)152 x 107x 72 mmWeight1478gPower Requirements48V DC, 5A max.
Redundant power with polarity reverse protection functionPower Consumption / Dissipation14.1 watts / 48 BUT (System loading without PoE)
134.1 watts / 457 BTU (Full loading with PoE function)Power over EthernetPoE StandardIEEE 802.3af / IEEE 802.3at Power over Ethernet / PSEPoE Power Supply TypeEnd-SpanPower Pin Assignment1/2(+), 3/6(-)PoE Power OutputPer port 52V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)
Per port 52V DC, 535mA. Max. 30 watts (IEEE 802.3at)Max. number of Class 4 PD4Switch SpecificationSwitch Processing SchemeStore-and-ForwardAddress Table1K entriesFlow ControlBack pressure for half duplex
IEEE 802.3x Pause Frame for full duplexSwitch fabric10GbpsThroughput (packet per second)7.44Mpps@64bytesMaximum Transmit Unit9216 bytesSpeedTP: 10/20Mbps, 100/200Mbps, 2000MbpsStandards ConformanceStandards ComplianceIEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3at High Power over Ethernet
IEEE 802.3af Power over EthernetRegulation ComplianceFCC Part 15 Class A, CEStability TestingIEC60068-2-32(Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)EnvironmentTemperatureOperating:-40~75 degree CStorage:-40~75 degrees CHumidityOperating:5~95% (Non-condensing)Storage:5~95% (Non-condensing)