Industrial Type Unmanaged Ethernet Switch (Industrial Unmanag

Industrial Switch for High Performance Data Collect and Forward

The ISW-511T and ISW-511TS15 are equipped with four 10/100Mbps ports offering auto MDI / MDIX feature and one 100Base-FX optic-fiber SC interface providing 1Gps non-blocking switch fabric and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss. The ISW-511T / ISW-511TS15, with come in the slim type IP 30 metal shape, is ideal for most Heavy Industrial demanding environments.

Physical Port

4-Port 10/100Base-TX RJ-45 with auto MDI/MDI-X function for ISW-511T series1-Port 100Base-FX interface on ISW-511T for up to 2km (Multimode fiber 62.5/125μm, 50/125µm) transmission distance1-Port 100Base-FX interface on ISW-511TS15 for up to 15km(Single-mode fiber 9/125µm) transmission distance Layer 2 FeaturesComplies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standardSupports Auto-Negotiation and 10/100Mbps half / full duplex mode for each copper portHigh performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packetsto optimize the network bandwidthPrevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)Backplane (Switching Fabric): 1GbpsIntegrated address look-up engine, supports 2K absolute MAC addresses1Mbit on-chip frame bufferAutomatic address learning and address agingCSMA/CD Protocol

Industrial Case / Installation

IP-30 Metal case / ProtectionDIN Rail and Wall Mount Design12 to 48V DC, redundant power with polarity reverse protection and connective removable terminal block for master and slave powerSupports EFT protection 6KV DC for power lineSupports 6KV DC Ethernet ESD protection-40 to 75 Degree C wide operating temperature

Hardware SpecificationsCopperPorts
4 x 10/100Base-TX, auto negotiation, auto-MDI / MDI-X

Cable
10Base-T : 2-pair UTP Cat. 3, 4, 5 cable (100meters, max.)
100Base-TX : 2-pair UTP Cat. 5 cable (100meters, max.)OpticalPort
1 x 100Base-FX

Cable
ISW-511T: 50/125μm / 62.5/125μm fiber
ISW-511TS15: 9/125μm fiber

Mode
ISW-511T: Multi-mode
ISW-511TS15: Single-mode

Distance
ISW-511T: 2km
ISW-511TS15: 15km

Frequency
ISW-511T: 1310nm
ISW-511TS15: 1310nm

Launch Power
ISW-511T: Max. -14dBm, Min. -20dBm
ISW-511TS15: Max. 0dBm, Min. -20dBm

Receive Sensitivity
ISW-511T: -32dBm
ISW-511TS15: -32dBm

Max. Input Power
ISW-511T: -14dBm
ISW-511TS15: 0dBmDimensions (W x D x H)135 x 97 x 32 mmWeight436gPower Requirements12~48V DC
Redundant power with polarity reverse protection functionPower Consumption / Dissipation13.7 watts / 46 BTUInstallationDIN rail kit and wall mount earAlarmProvides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24VSwitch SpecificationsSwitch Processing SchemeStore-and-ForwardAddress Table2K entriesBuffer1MbitFlow ControlBack pressure for half duplex,
IEEE 802.3x pause frame for full duplexSwitch Fabric1GbpsThroughput (Packet Per Second)0.74Mpps @ 64BytesStandards ConformanceStandards ComplianceIEEE 802.3 Ethernet, 10Base-T
IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
IEEE 802.3x full-duplex flow controlTemperatureOperating: -40~75 degrees C
Storage: -40~85 degrees CHumidity OperatingOperating: 5~90%
Storage: 5~90% (Non-condensing)Regulation ComplianceFCC Part 15 Class A, CEStability TestingIEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)