1-port 802.3at PoE+ <-> 2-port 802.3af/at Gigabit PoE+ Siny

Fiziksel Port

- 1-port veri+ güç girişi- 2-port veri+ güç çıkışı3-port 10/100/1000BASE-T Gigabit RJ45 arayüz

Power over Ethernet

- IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD destekler- PoE girişi 30.8 watt güç beslemesi yapar- IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE destekler- Maksimum 2 IEEE 802.3af/802.3at cihaza güç beslemesi yapabilir- Çıkışlara bağlı cihazlara 25 watt güç beslemesi yapabilir- Elektrikle beslenen cihazları (powered device (PD)) otomatik algılar1-port veri + güç girişi2-port veri + güç çıkışıPoE sinyalini ek olarak 100 metre ileriye taşırEthernet ve PoE güç sinyallerini uzaktaki cihazlara ulaştırır

Layer 2 Özellikler

10/100/1000Mbps auto-negotiation ve auto MDI/MDI-X özelliğine sahip2K MAC addres kapasitesine sahip10K iumbo paket desteğiIEEE 802.1Q VLAN transparencyStore-and-Forward mod desteklerFull duplex çalışırken IEEE 802.3x akış kontrolü özelliği ve half duplex çalışırken backpressure özelliğine sahipOtomatik adres öğrenme ve adres aging özelliğiCSMA/CD protokolünü destekler

Şasi ve Kurulum

Harici güç kablosu gerektirmezMetal şasi, kompakt, masaüstü boyutDuvara monte edilebilir, Tak & Çalıştır özelliği0 ~ 50 derece C çalışma ısısına sahip

InterfacesPoE IN1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in
auto MDI/MDI-X, auto-negotiation RJ45 connectorPoE OUT2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out
auto MDI/MDI-X, auto-negotiation RJ45 connectorPower over EthernetPoE Standard“PoE In” Port
IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per “PoE Out” Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSEPoE Power Supply TypeEnd-span (Type A)PoE Power“PoE In” Port
52~56V DC, max. 30.8 watts
Per “PoE Out” Port
44~55V DC, max. 25 wattsPower Pin Assignment“PoE In” Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per “PoE Out” Port
1/2 (+), 3/6 (-)Hardware SpecificationsData Rate10/100/1000MbpsMAC Address Table2KData Buffer2MbitsSwitch ArchitectureStore-and-ForwardSwitch Fabric6GbpsSwitch Throughput4.46Mpps @ 64 bytesJumbo Frame10KBFlow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplexLED Indicators“PoE In” Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
“PoE Out” Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
“PoE Out” Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)ProtectionESD (Ethernet): 2KV (TBD)
Surge (EFT for power) : 2KV (TBD)EnclosureMetalInstallationWall mountableDimensions (W x D x H)140 x 77 x 28 mmWeight234gPower RequirementsIEEE 802.3at compliant with voltage within 52V-56V DCPower Consumption1.6 watts/5.5BTU (System on with PoE input)
2.2 watts/7.5BTU (Ethernet full loading without PoE function)
36 watts/122.8BTU (Full loading with PoE function)Network Cable10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)Standard ConformanceRegulatory ComplianceFCC Part 15 Class A, CEStandard ComplianceIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow ControlEnvironmentOperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)